Finding ip address windows xp

Public IP Address vs. Private IP Address
  1. Find the IP address of another networked computer in Windows
  2. How to Find Your PC’s IP Address in Windows XP - dummies
  3. Detect Your IP Address with Command Prompt
  4. Windows XP - Finding the IP Number and MAC Address of a Network Card
  5. How to find your public IP address

The term "host" here means a device connected to the Internet, such as a personal computer. DHCP servers are responsible for automatically assigning IP addresses and other configuration information to computers and other "host" devices.

Need to Contact Support?

In a large network in a corporate, university or government environment, for example , one or more dedicated computers will act as DHCP servers. Such routers are generally pre-configured to automatically grant IP addresses to client computers and other devices, upon request. In recent years, the term "router" is very often used to refer to the Internet routers commonly used in homes and small business. This type of router typically offers ports for either four or eight wired Ethernet connections to client computers.

They are typically connected to an Internet router via an Ethernet cable.

Find the IP address of another networked computer in Windows

They contain Wi-Fi Incoming data from the broadband network is received at the cable modem or DSL modem, and is passed on to the router, which distributes it directly to computers via wired Ethernet connections, and optionally also to one or more wireless APs, which transmit the data in turn to nearby computers and other devices which have been configured with Wi-Fi adapters. Recently, wireless APs and Internet routers are often packaged together into one compact box, typically called a 'wireless router'. Combination broadband modem, router and AP products are also available.

To check that your computer is correctly configured to issue a DHCP request, follow this procedure for Windows XP, though the process for Windows is similar :. Click Properties. If, instead, you see values in the fields for IP Address, Subnet mask, etc. Alternately, you could write down or otherwise carefully record the exact contents of the various fields, and then try selecting "Obtain an IP address automatically" and "Obtain DNS server address automatically".

How to Find Your PC’s IP Address in Windows XP - dummies

If you make these changes, click the OK button once you've finished. If you travel and use broadband connections elsewhere, you will often find this procedure of releasing and renewing the IP address to be necessary. Unless you are experienced with networks, however, this may be more than you want to know.

The switches " flushdns " and " displaydns " are are also sometimes useful in everyday use and they are discussed on another page at a sister site. Ping is an old Unix tool that has been around for a long time but many PC users are unfamiliar with the Windows version. Ping sends out a packet to a designated internet host or network computer and measures its response time. The target computer will return hopefully a signal. It is a way of determining the quality of your connection to another site.

For example to ping Dell, enter: ping dell.

Detect Your IP Address with Command Prompt

Many sites also do not require "www". By convention, 32 byte packets will be transmitted four times. You will receive a screen output that looks like:. The screen tells me that the IP for dell. This can change. It also tells me that the average round trip time for a packet was 69 milliseconds, which means I have a good connection to dell. Long reply times of several hundred milliseconds are indicative of a slow connection. Note that some major sites such as microsoft.

In that case you will get a "Request timed out" message.

Windows XP - Finding the IP Number and MAC Address of a Network Card

In addition to being used on the Internet, Ping is often used to test connections on local networks. More details can be found in this Microsoft article. Tracert traceroute is another old tool borrowed from Unix. The actual path between two computers on the Internet is not a straight line but consists of numerous segments or "hops" from one intermediate computer to another. Tracert shows each step of the path taken. It can be interesting to see just how convoluted it is. The times for each hop and the IP addresses for each intermediate computer are displayed. Tracert shows up to 30 hops.

It is convenient for finding if there is one particular segment that is causing a slow or bad connection. A typical command might be "tracert dell. This command combines functions of Ping and Tracert. Pathping will first list the number of hops required to reach the address you are testing and then send multiple pings to each router between you and the destination. After that, it computes results based on the packets returned from each router. Because pathping displays the degree of packet loss at any given router or link, you can determine which routers or subnets might be having network problems.

Note that the whole process may consume minutes because many pings are being sent.

How to find your public IP address

It comes with a number of switches for displaying a variety of properties of the network and TCP connections. One tricky point: the switches must be prefixed with a minus, not a slash. More detail is at this page.